NEW - This is a 10.1" LVDS LCD Kit with everything you need to attach a LVDS LCD to your BeagleBoard or PandaBoard. This LCD Kit includes all of the following:
- Chunghwa CLAA101NB01 10.1" LVDS LCD
- Animal LVDS Mini Board (includes hardware board mounts)
- LVDS 20455 Adapter board
- 40-pin ribbon cable (length = 18 inches)
- 40-pin LVDS cable assembly (length = 6 inches
This LVDS LCD Kit works with the following main boards:
- BeagleBoard Rev-C
- BeagleBoard-xM
- PandaBoard
- PandaBoard-ES
The Chunghwa CLAA101NB01 LCD panel has the following specifications:
- Size: 10.1 inch diagonal
- Resolution: 1024 H x 600 V
- Number of Colors: 262,144
- Interface: LVDS
Documents:
Other options you might need are:
20-pin Female Headers
- These connectors have to be soldered into the LCD expansion port on the back of the main board.
These connectors are required on the following boards: PandaBoard,
PandaBoard-ES, BeagleBoard Rev-C. (They are not required on the
BeagleBoard-xM).
5V2A Power Supply - This power supply provides enough power for your main board as well as the extra power required for the LVDS LCD Kit.
22 Ohm Resistors
- This piece of cut tape contains approximately 50 pieces of 0402 22
Ohm resistors. These resistors have to be soldered onto the back side
of the original PandaBoard. (These are only required if you have an
original Pandaboard - they are not required on Beagleboard or
PandaBoard-ES).
